Experience the extreme performance of an OWC SSD upgrade with this easy DIY SSD and hard drive replacement kit. Add an SSD to your hard drive equipped iMac to experience faster booting, near instant application launches and data transfer speeds up over 500 MB/s.

• Capacity: 2000GB Useable Capacity; Total Flash Memory Components: 2048GB; 48GB Allocated to real-time data redundancy and error correction
• Formatted Capacity: 1863GiB
• Form Factor: 2.5-inch 7mm
• Storage Interface: SATA 6.0 Gb/s
• Controller: Phison PS3112-S12 with 3% over-provisioning
• NAND Flash Components: Micron Synchronous Quad-Level Cell (QLC) 3D NAND Flash
• S.M.A.R.T. Attributes: Standard attributes supported
• Native Command Queuing (NCQ): Up to 32 simultaneous commands
• RAID Support: Yes
• RoHS Compliant: Yes
• Reach Certification: Yes
• Sequential Read (Max): Up to 525 MB/s
• Sequential Write (Max): Up to 516 MB/s
• Sequential Read (Average): 514 MB/s
• Sequential Write (Average): 513 MB/s
• Nonrecoverable Read Errors: 1 per 1016 bits read
• MTBF (Mean Time Between Failures): 1,600,000 hours
• Wear Leveling: Supported
• TRIM Support: OS Dependent
• Security: Secure Erase (SE); Crypto Erase
• Endurance: 215TB total bytes written (TBW), equal to 118 GB per day for 5 years
• Mac OS Compatibility: Yes
• PC OS Compatibility: Yes
• Other Requirements: Host or device with a built-in SATA connection.
• Write Mode (Max): Up to 1.9 Watts
• Seek Mode (Max): Up to 1.9 Watts
• Idle Mode (Max): Up to 0.1 Watts
• Dimensions: Height: 0.7 cm (0.3 in); Length: 10.0 cm (3.9 in); Width: 7.0 cm (2.8 in)
• Ambient Temperature: Operating: 32?F to 158?F (0?C to 70?C); Non-Operating: -40?F to 185?F (-40?C to 85?C)
• Altitude: Operating: -304.8 m to 3,048.0 m (-1,000 ft to 10,000 ft); Non-Operating: -304.8 m to 12,192.0 m (-1,000 ft to 40,000 ft)
• Humidity: Operating: 5% to 90% non-condensing; Non-Operating: 0% to 93% non-condensing
• Idle (Typical): 0.0 bels
• Seek (Typical): 0.0 bels
• Applications: General Purpose High-performance SSD.