🧼 Cleaning Steps

Preparation: You'll need a bottle of foam cleaner and a dedicated soft sponge. If the sponge is dry, you can lightly dampen it with clean water and squeeze it out—this makes cleaning smoother.

Spray the foam: Shake the bottle well before use. Hold it about 15 cm away from the rubber surface and press the nozzle for about 1 second, so a fine layer of foam covers the rubber evenly.

Let it sit: Don’t wipe immediately. Let the foam sit on the rubber for 30–40 seconds. This gives the cleaner time to penetrate the rubber’s texture and break down sweat and dust.

Wipe clean: Using the sponge, gently wipe the entire rubber surface in small circular motions until the foam and dirt are removed.

💨 The Crucial Drying Step

After cleaning, the most important step:

Let it dry completely: Place the racket in a cool, well‑ventilated area and let it air dry. This takes at least 10 minutes. A simple way to know it’s ready is when the rubber surface feels dry and tacky again.

Why you shouldn’t rush it: If you put the protective sheet on before the rubber is completely dry, moisture and cleaner residue will be trapped underneath. The next time you play, the surface will feel slippery, reducing grip and making it harder to spin the ball.

🛡️ Aftercare

Apply the protective sheet: Once the rubber is fully dry, put on a clean protective sheet. This effectively seals out dust and slows down oxidation.

Avoid tap water: Always use a dedicated rubber cleaner. The chlorine in tap water can accelerate aging of the rubber.

📝 A Few Tips

• Don’t spray directly onto the sponge: Aim the spray only at the rubber surface to prevent liquid from seeping into the adhesive layer between the sponge and the blade.

• Control the amount: Use just enough foam to cover the rubber surface. Too much will extend the drying time.

• Clean regularly: It’s recommended to clean the rubber 1–2 times a week. If you play often, a quick clean after each session is best.