Cal-Van Amp Hound 2 - Circuit Tester

The Amp Hound 2 is a designated Amp meter for a safe and convenient method to determine real time readings of current and amps in fused circuit without removing the fuse. Convenient and easy adapters that attach to a fuse or just touch the probes to the top of the fuse for an amp reading. A tone lets you know when you are touching a fuse that has parasitic draw and no need to remove fuse or stare at meter. Works on multiple fuse type along with three of the most common automotive fuse types. Very safe to use with no chance of shorting a circuit while the fuse is removed. Works on new fuse types Mini-LP and Micro-Fuse, along with three of the most common automotive fuses types: Mini, Standard and Maxi with all of the most common ranges.

PARASITIC DRAW TEST: Will locate circuits that are flowing current when the vehicle is turned off.
Real time readings of current and amps in fused circuit without removing fuse
For use on 6V, 12V and 24V systems only
AMPERAGE RANGE: 5mA to 50A
Eliminates the need to refer to voltage drop charts
Ideal for locating a parasitic drain
Special fuse adapters lock on to fuse to give user hands-free control
Allows easy component testing and parasitic drain location
Takes amperage readings without having to access hard to reach components
Audible tone when in contact with fuse, ensuring use has complete contact
Includes Nylon Travel Pouch

Fuse Type / Range*:
Mini/LP/Micro (ATM) 5A, 7.5A, 10A, 15A, 20A, 25A, 30A
Standard (ATC) 5A, 7.5A, 10A, 15A, 20A, 25A, 30A
Maxi 30A, 40A, 50A

*Fuse values that are not listed may be measured with only limited accuracy error