Usage Instructions:

Testing: Without attaching the rubber to the blade, follow steps 3-4, then flip the blade to check if the curvature of the bow blade matches that of the blade (ensure there is no significant gap between the bottom of the rubber attachment area and the bow blade). If a noticeable gap exists, increase the rotation force appropriately until the curvature aligns, then proceed to step 6 to remove the bow blade.

Attaching the Rubber: Apply adhesive to one side of the blade and the rubber (or test rubber). Attach the rubber smoothly.

Installing the Blade: Hook the bow strings on both sides of the bow blade around the racket handle, ensuring the rotating buckle faces upward. Fit the bow blade onto the outer edge of the blade and secure the rotating buckle (the buckle should be installed at the junction of the handle and the blade).

Tightening the Bow Strings: Press the rotating knob and turn it clockwise to tighten the bow strings while adjusting the bow blade's position to maintain symmetry. Apply the same force used during testing to ensure the bow blade's curvature matches the blade's curvature.

Cutting the Rubber: Flip the blade so the rubber faces upward. Use a rolling pin to press and cut along the edge of the blade from right to left (tilt the rolling pin outward; avoid pressing it inward against the blade) until the cutting is complete (left-handed users may cut from left to right).

Removing the Bow Blade: After cutting, flip the blade, pull up the rotating knob, and separate the bow blade by pulling it apart to both sides. Then remove the rotating buckle and take off the bow blade. Repeat the above steps to cut the rubber on the side.

Specifications:

Material: Rubber/Metal/Wood/Polyester

Size: As shown in the picture

Color: Black

Note:Glove and rubber colors are random

Package Includes:1Set

Note:

1. Please note that the photo does not show actual size please refer to Description for size details.

2. Please allow differences due to manual measurement thanks.

3. Due to the difference between different monitors the image may not reflect the actual color of the item.