Specifications

Power:<10W
Item Width:13 Cm
Power Mode:5V
Item Height:6 Cm
Item Length:24 Cm
Rated Power:5W
Switch Type:Rotary Switch
Material Type:ABS

Details

Introduction:

The weight of the double outlet is 580g, built-in 2 nickel-metal hydride batteries/800mAh each, size 17.5 14.5 8cm The ordinary model with three outlets weighs 700g, built-in 2 nickel-metal hydride batteries/each 2400mAh, size 22 6.5 11cm The three-outlet upgrade has a weight of 700g, built-in 2 nickel-metal hydride batteries/each 800mAh, size 24 6 13cm (The above weight is the weight with packaging, color box). Delivery: Two-port, three-port upgrade models with USB cable, rubber strips, English manual (three-port ordinary models are shipped without USB). Charging mode: dual-port, three-port upgraded version can be charged by USB or solar, three-port ordinary models can only be charged by solar. Material: ABS Solar power: 1.5W for two ports, 1.5W for three normal models, and 5W for three upgraded models Solar location: outside the car window Charging indicator: Yes Solar panel adjustment angle: yes Speed: 4500 rpm Continuous working time: 5-8h

Steps for usage

1. Pull down the window and fix the short adhesive strip from the outside of the window first.
2. Put the car ventilation fan on the inside of the door, and one end is stuck with the gap of the short rubber strip.
3. The long rubber strip is cut to the appropriate length according to the length of the window and fixed onthe window.
4. Seize the gap between the car ventilator and the long rubber strip at the other end.
5. Slowly close the window and fix the adhesive strip on the edge of the window frame to the groove.
6. Adjust the angle of the solar panel so that it faces the sun, full light, and charge the battery.